Vista Tips

kat2220

Super Moderator
Staff member
Joined
Jun 11, 2002
Messages
16,886
Points
0
Location
Marietta, GA
Vista: A Double Dose

Here are a couple of great Windows Vista tips for you today. So, if you're ready for a double dose of Vista, make sure you keep reading. You're not going to want to miss out on these. Here we go!

Tip #1 - Recovering Previous Document Versions

Have you ever worked on a document and then made some changes to it? Or, maybe you accidentally deleted it. Either way, have there ever been times when you just wanted to go back to that old version? You know, the way it was before you made all those changes. If so, there's an easy way to do it in Vista. Yep, you heard me right! Keep reading for all the details.

Here are a few scenarios in which the option of recovering a previous version of a document comes in handy:

1.) Accidentally deleting a file.

2.) File corrupts due to other reasons.

3.) File is overwritten automatically by any malicious programs or viruses.

4.) You have upgraded from Windows XP to Windows Vista and some of the files that were created in Windows XP may not open. With this feature though, you can make them compatible with Windows Vista and you will still be able to access them at any time.

This recovery feature really is wonderful technology. It could not be any easier to do. Here's how:

Right click the folder where the document is stored.
Click the Previous Version tab.
Now, select the latest item under the Date Modified column.
Finally, click on the Restore button.
That's it! Now, in the unlikely event that this technique does not retrieve the document you wanted, just return to the same menu and select an even older version.



Alright, here comes the second one!

Tip #2 - Getting Better Sound in Vista

If you have a good audio support from your computer, you can do wonders with your sound in Vista. Did you know that? Well, keep reading to learn all about it!

1.) First, go to Start, Control Panel.



2.) Click on the Sound tab.



3.) Select the Speakers icon under the Playback tab and then click on the Properties button.



4.) Next, click on Enhancements and from there, you can adjust your controls for better sound quality.



Now you have options to play around with for your sound settings. You can control the bass levels, create virtual surround sound on a two-speaker system, room acoustics and even change the loudness settings.

Loudness Equalization

One annoying feature of watching broadcast television that I'm sure you're familiar with is the fact that different channels have their volume tuned to different levels and commercials usually have volumes louder than any of the programs. This leads to constant fine tuning of the volume control in order to achieve an acceptable sound balance for you and your family.

Some high-definition televisions already come with volume leveling controls built in, but these only work if you are using the television's speakers. Most people with HDTVs will be using their sound systems to listen to the audio feed instead.

On the other hand, Windows Vista will maintain a relatively constant perceived volume while playing different audio files or sources. Some applications, such as Apple's iTunes, are already implemented with the volume leveling technology, but it must be applied to a single music file, one at a time. Vista's system works in real time, while analyzing both long-term and short-term fluctuations in sound volume in order to apply a constant equalization. This feature can be turned off if desired through the Control Panel, as discussed above. And there you have it!



Hope these two tips help you out in a great way!

~ Ramachandran Kumaraswami

__._,_.___
 
I'm getting used to Vista on my new machine, but I don't use it all that much yet and have yet to load up any of my programs that I use. But here's a short story that I'll throw out.

I wanted to network that computer to this one that is probably the "main" computer in the network. The wife is networked in with her laptop and she can use the "main" printer that I have beside this computer. Of course, the wizards are different and learning a new operating system always takes a little time. Well, I went through the process of trying to connect to the network maybe a hundred times, only to see the computer telling me that it was already connected to a network. When I asked to see all the computers on the network, it would only show me the new one. After about an hour, I gave up, but before I left, I thought I would check to see if it was connected. How bout that, it finally showed the other two computers and I thought that was that and shut the machine down and headed to bed. The next day, I checked the network and guess what, it only showed one machine. Argh! So I went through the process again and again and again I gave up, but wait, I thought I would check one last time again and viola, it was connected again. This time, while it was connected, I transfered the files I had moved from the old computer to the "main" one , to the new computer. So now I thought all was good. So, next would be the printer, and I then found out that the Dell printer that I got with the "main" computer when I bought it but didn't use it, wouldn't work with Windows Vista. Argh! Okay, I'll just hook into the network printer. I went through everything and it found the printer and asked if I wanted to print a test page. Yep, I clicked and then ran upstairs to see if it work. Argh! It didn't. I played and played around, including putting in the installation disk to no avail. I'll probably buy a cheap printer that will work down there but for now, I don't have the ability to print anything from that computer. Of course, I didn't with the old computer either, but that's another story.

I don't know if either of those situations are anomalies or if I didn't do things just right, but for sure, I learned a lot. :) But one thing is for sure, sooner or later, the majority of PC users will be using Vista, like it or not. I remember when people were saying the same thing about XP.
 
If the printer is networked it should have an IP address, much the same as your computer, which you get by printing the configuration page. Then when you add a printer you add it by typing in the IP address rather than choosing the printer from a drop down box.
Windows XP IP Printing Setup
 
If the printer is networked it should have an IP address, much the same as your computer, which you get by printing the configuration page. Then when you add a printer you add it by typing in the IP address rather than choosing the printer from a drop down box.
Windows XP IP Printing Setup
and you should be able to use either documentation, google, or the "connected devices" page of your router to discover the IP of the printer.

XP is known as windows 2002 to microsoft. I think we switched to it in late 2003. A full 2 years after it was released. I wouldnt be surprised if i wait just as long or longer for vista.
 
Back
Top Bottom