KTMLew01's latest activity

Think will build a cradle of sorts that fits on floor jack. Make it easier going back in. The flat section of the bellhousing is the...

Crusty dowel pin.

Got it did. Throw out bearing had come apart. Transmission probably doesn't weigh 50 lbs.

Neighbor returned the clutch kit and will order one from Amazon that includes the flywheel for same money as just pressure...

Max Blair 3rd.

RTJ wins Hillbilly 100. Led every lap. 49 second 111 third? Can't think of his name. Just waiting to hear Davenport whine. Here we...

Joseph Joiner of HTF is driving the JCM #19. Davenport thought he was crowding him down front straight on start. He whined about him...

Davenport is the biggest whiner ever if he gets raced like he races others. Whaaaaa! He go too close to me on the start! Whaaaa!

IDK what is going on. Every pic I post gets flipped 90 degrees. I surrender.

Guess when look again see if it does have 3rd bolt. Picture I took doesn't show the middle hole.

Al says too boltz.

When mounted solenoid is on left. So roll it over 1/2 turn.

All three holes are threaded but the bolts go thru bell housing from the rear. I've only found two bolts.

Neighbor that did upper part of underlayment came over, said had the clutch for his BMW 525i. So we got it 85% of the way apart except...

Guess post count doesn't work anymore. So sad. He'll be stuck at 89,532 for ever.