Storage building

Still thinking about doing something.
 

Attachments

  • IMG_20250417_113017350_HDR.jpg
    IMG_20250417_113017350_HDR.jpg
    4.1 MB · Views: 6
  • IMG_20250417_123447652_HDR.jpg
    IMG_20250417_123447652_HDR.jpg
    2.9 MB · Views: 5
  • IMG_20250417_123456680_HDR.jpg
    IMG_20250417_123456680_HDR.jpg
    4.3 MB · Views: 5
Going to encapsulate the mounts for the 2x8's for platform. Have them so can slide them in/out. Will use them as scaffolding for roofing. Need to slide them in on side putting OSB on roof. Don't want to cut them because of above.
 
When working on my cobbled mess must have head on a swivel. Lots of ignorantly place things to hit. Problem is, more I move my head the wobbler I get. Not exactly dizzy just lack balance. Probably will resolve after death. Got something from Amazon. My first hooker too.
 

Attachments

  • IMG_20250418_105035088.jpg
    IMG_20250418_105035088.jpg
    1.5 MB · Views: 5
  • th.jpeg
    th.jpeg
    11.9 KB · Views: 6
Got the platform 2x8 so they move. Didn't have to climb for that. Probably should add another at back of old shed. Will need it soon.
 

Attachments

  • IMG_20250418_104718883_HDR.jpg
    IMG_20250418_104718883_HDR.jpg
    5.3 MB · Views: 3
  • IMG_20250418_104730131_HDR.jpg
    IMG_20250418_104730131_HDR.jpg
    4.3 MB · Views: 3
Had removed a 2x6 diagonal from back wall as thought didn't need it. Working on moving the platform 2x8's showed me...SHE BE LITTLE WOBBLY MY MAN. Not much but definitely wasn't that solid. So...put it back in place and shot several nails in. Haven't done anything since 11:00AM. Head is little fubar. Seems looking up is the main trigger.

Really think when go back to work gonna peel the old roof off so can set rest of rafters. Once figure out the OSB lift, the install of all 22 feet will happen really quick. Then little drip edge and roll the peel & stick underlayment on. Just hope it's still good and not permanently stuck to protective film. It's kinda like applying stickers. Peel the backing and try to get on without bubbles/ripples. It will get nailed at top edge where it overlaps. The steep sides WILL slide off in hot weather if not nailed. Or so I'm told.

My head feels funny. Not in a laughing about it way. Bleh.
 
Finished extending the wires to the winch remote. Technically a no-no but it was waaay too short. I want it so you can go hide around the corner. For what I'll use it for won't be pulling any load/amps. Did a bunch of minor stuff been avoiding. No climbing. Look like I been in the whiskey just walking on flat ground.

Bleh. Next is...maybe...rip the old roof off. When I can stand up and not feel like I might puke.
 
Put everything back on trailer and covered it. So pizzed off. Just can't do anything that requires any head movement. Need to trim the OSB so fits the roof. 47" & 44" ish. Started to do but even walking around/looking down makes me wobbly. Not spinning with vertigo, just off balance. Think will try stacking 3 sheets, use 4th as a guide. Clamp them together with top sheet offset 4 & 1/4 + however much need removed to guide circular saw. Poormans track saw.
 
KTMLew01 said:
Pulse rate is usually in the 70s so something not right.
Click to expand...
Maybe a vacuum leak & running little lean? Still managed to stuff the little A/C in the bedroom window. Should get rid of that headboard & vanity mirror & build shelves. I put the AC on some totes beside the bed so not much lifting. If build shelf, could just slide it out & over? In cold weather can feel the air just rolling in on my old dome. So pull it out and put the window back together.
 

Attachments

  • IMG_20250419_152244145.jpg
    IMG_20250419_152244145.jpg
    3.6 MB · Views: 3
You must log in or register to reply here.
Back
Top Bottom